Inductive Smart Coil, Spark Energy up to 118 mJ!AEM Electronics30-2853

Inductive Smart Coil, Spark Energy up to 118 mJ!AEM Electronics30-2853

AEM's High-Output Inductive Coils each deliver over 100mJ of spark energy and a minimum of 40,000 Volts-as much as most CDI systems, without the need for a CDI module! They also provide very long spark duration at full energy, unlike CDI systems and multiple spark systems which fire off small spark events prior to and after their CDI burst to mimic longer spark duration.

Specifications:

Brand	AEM
Category	Ignition
2251	SMART
2252	No
Emission Code	5
Ignition Wire Terminal Type	HEI Style Tower
92	No
30	No
Product Type	Distrutorless Ignition - DIS - smart coil
Sub Category	Ignition Coil
Warning	California Proposition 65
Warranty	Manufacturer's 1 Year Warranty
Description_INV	SMART HO DIS COIL KIT
Description_ASC	IMPORTANT: AEM High Output IGBT Smart and Dumb Coils are intended for coil-near-plug use ONLY. They are NOT intended for use on distributed applications and AEM cannot guarantee or warranty the performance of its IGBT coils when used on distributed ignition vehicles.
Description_ASC	Output (no load): 40kV minimum
Description_ASC	Output (50pF load): 40kV +/- 10%
Description_ASC	Output Energy: 103 mJ +/- 7%
Description_ASC	Peak Secondary Current: 102 mA +/- 10%
Description_ASC	Arc Duration: 2.9mS +/- 10%
Description_ASC	Turns Ratio 71:1
Description_ASC	Maximum Current: 19 Amps
Description_ASC	Maximum Battery Voltage: 17 Volts
Description_ASC	Base Dwell: 3.0 mS
Description_ASC	Max Continuous Dwell: 9 mS but don't exceed 40% duty cycle
Description_ASC	Max Intermittent Dwell: 80% duty cycle, 5 seconds maximum
Description_ASC	Mating Connector: Packard/Delphi 12162825 "Pull to Seat"
Description_ASC	Mating Contacts: Packard/Delphi 12124075 "Pull to Seat"
Description_ASC	High Tension Wire Terminal: HEI "spark plug top" Style
Description_DES	AEM High Output Smart Coil
Description_EXT	Inductive Smart Coil, Spark Energy up to 118 mJ!
Description_MKT	The tradeoff between adequate spark energy and adequate spark duration ends with AEM's High-Output Inductive Coils, the first inductive coils that deliver CDI-like spark energy and voltage, and the long spark duration necessary for vehicles running high compression, high RPM, forced induction and/or nitrous engines.
Description_MKT	Auto enthusiasts who have forced induction engines, high RPM engines or run nitrous oxide are aware of the compromises that come with using inductive coils instead of converting to a Capacitive Discharge Ignition system (CDI). While inductive coils deliver a long spark duration with simplicity, they lack the energy to adequately ignite the mixture in the combustion chamber of a highly modified performance vehicle. Conversely, CDIs deliver an intense burst of spark energy, but with practically no spark duration, which makes having the proper air/fuel mixture in the combustion chamber paramount for best performance. This compromise ends with AEM's High-Output IGBT "Smart" Inductive Coils.
Description_MKT	AEM's High-Output, Insulated Gate Bipolar Transistor (IGBT) "Smart" Inductive Coils are designed for use on applications that do not have an external igniter.
Description_MKT	AEM's High-Output Inductive Coils each deliver over 100mJ of spark energy and a minimum of 40,000 Volts-as much as most CDI systems, without the need for a CDI module! They also provide very long spark duration at full energy, unlike CDI systems and multiple spark systems which fire off small spark events prior to and after their CDI burst to mimic longer spark duration.
Description_FAB	Massive Spark Energy, up to 103 mJ
Description_FAB	Incredibly long spark duration, up to 2.9mS
Description_FAB	Up to 40kV Output Voltage, without using a CDI
Description_FAB	Deliver CDI-like spark energy-No CDI Module needed
Description_FAB	Cost less than aftermarket LS1 coils
Description_FAB	Can be mounted almost anywhere
Description_FAB	Weather and Shockproof design
Description_FAB	Can be mounted directly to the Engine