SOFTRIDE FRT SPRG/4IN. 67-72GMSkyjackerC240S
$214.99
Precio habitual
$214.99
Precio de oferta
$214.99
Precio habitual
$231.62
Precio unitario
por
No se pudo cargar la disponibilidad de retiro
¿Quieres entrega al día siguiente? ¡Date prisa!
Lo sentimos, está agotado.
Pero podemos avisarte cuando vuelva a estar disponible.
Hasta $16.63 de descuentoAgotado
SOFTRIDE FRT SPRG/4IN. 67-72GMSkyjackerC240S
Softride(R) springs use only American steel and the individual leafs of each spring are shot-peened with hard steel pellets at very high velocities. This shot-peening compresses the surface of the steel thereby increasing the tensile strength of the spring. Without this shot-peening procedure, the maximum wheel travel and ride quality could not be achieved without sacrificing the life of the spring. Softride(R) springs use bolt style spring clips, eliminating friction. Other spring designs use the c in. style bend clips which bend tightly over the spring leafs causing binding and friction. Skyjacker(R) Softride(R) springs taper over the entire length of the leaf creating more flex at the leaf ends. This tapering distributes loads more evenly over a greater area and reduces the tendency for one leaf to dig into the leaf above it.
Specifications:
| Lift/Drop Height | 4 in. |
| WARNING CA Proposition 65 | Yes |
| WARNING CA Proposition 65 Message | California Residents- WARNING: Cancer and-or other Reproductive Harm. (For more information go to www.p65warnings.ca.gov) |
| Description_DES | SOFTRIDE FRT SPRG/4IN. 67-72GM |
| Description_EXT | SOFTRIDE FRT SPRG/4in.67-72GM |
| Description_FAB | Constructed As Progressive Multileaf Packs |
| Description_FAB | Load Capacity Will Be Equal or Greater Than OE |
| Description_FAB | Made With American Steel |
| Description_FAB | Limited Lifetime Warranty |
| Description_INV | SOFTRIDE FRT SPRG/4in.67-72GM |
| Description_MKT | Softride(R) springs use only American steel and the individual leafs of each spring are shot-peened with hard steel pellets at very high velocities. This shot-peening compresses the surface of the steel thereby increasing the tensile strength of the spring. Without this shot-peening procedure, the maximum wheel travel and ride quality could not be achieved without sacrificing the life of the spring. Softride(R) springs use bolt style spring clips, eliminating friction. Other spring designs use the c in. style bend clips which bend tightly over the spring leafs causing binding and friction. Skyjacker(R) Softride(R) springs taper over the entire length of the leaf creating more flex at the leaf ends. This tapering distributes loads more evenly over a greater area and reduces the tendency for one leaf to dig into the leaf above it. |
| Description_SHO | Leaf Spring |
